Hair Like Growth in Toilet Bowl: How to Remove?

If you have ever seen hair like growth in your toilet bowl, then you know the struggle of trying to remove it.

This guide will teach you how to remove these pesky hair-like stains and get your toilet bowl back to its original state.

Keep reading.

Try Using Baking Soda: 

When it comes to getting rid of hair-like growth in a toilet bowl, baking soda is a great option. It’s affordable, easy to use, effective, and can clean many stubborn stains.

What You’ll Need:

• 1/2 cup baking soda.
• 1-quart warm water.
• A toilet brush or scrubber.

Instructions:

1. Start by pouring the baking soda into the toilet bowl.
2. Add the warm water and stir to combine.
3. Use the toilet brush to scrub the sides of the bowl, paying special attention to areas with hair-like growth.
4. Flush the toilet to rinse away the baking soda and debris.
5. Repeat as necessary until the hair-like growth is gone.

Basic Toilet Brush And Soap Can Come in Handy

This is the most basic method to get rid of mold in a toilet bowl. Toilet cleaners are generally safe to use on porcelain toilets. However, read the label carefully before using any cleaner on your toilet. 

What You’ll Need:

• Toilet brush.
• Soap (toilet cleaner).

Instructions:

1. First, flush the toilet to wet the sides of the bowl. This will help the soap to stick to the mold and make it easier to scrub off. 
2. Squirt some toilet cleaner around the bowl.
3. Next, pour a small amount of soap onto the toilet brush and scrub at the moldy areas. Be sure to get into all the nooks and crannies where mold likes to hide. Pay special attention to the areas under the rim.
4. Let the solution sit for several minutes before scrubbing again.
5.  Flush the toilet to rinse away any residue, removing all traces of soap and dissolved mold.
6. Repeat steps 1-5 as necessary until all the mold is gone.

Pumice Stone And Soapy Water is a Good Combination

Pumice stone is a natural way to remove mold from the toilet bowl. It is a volcanic rock that has been used for centuries to clean all sorts of things.

It is safe to use and will not scratch the toilet bowl. The abrasiveness of the pumice stone will help to scrub away the mold.

What You’ll Need:

• Pumice stone.
• Soapy water. 

Instructions: 

1. Start by wetting the pumice stone with soapy water.
2. Proceed to rub the pumice stone over the affected areas thoroughly till the growth comes off the surfaces. 
3. Flush the toilet bowl to check if the growth has come off completely.
4. Repeat the steps if necessary till you get your desired result.

Please note that this method may take some time and effort. Plus, using this incorrectly can cause the surface of the toilet bowl to get scratched up.

Using Bleach Can Help

Bleach contains chlorine, a powerful disinfectant that will kill the bacteria/fungus that cause hair-like growth.

In addition, bleach is also an excellent deodorizer, so it will leave your bathroom smelling fresh and clean though it’s important to use bleach safely.

What You’ll Need:

• Nose mask.
• 1/2 cup of bleach.
• Brush/Scrubber.
• A clean bucket or container.
• Gloves.

Instructions:

1. Wear gloves and a mask.
2. Pour the bleach into the bucket or container.
3. Add enough water to the container to fully submerge the brush/scrubber.
4. Let the brush or scrubber soak in the mixture for 10 – 15 minutes. At the same time, pour some bleach on the toilet bowl to loosen up the hair-like growth/mold.
5. Use the brush or scrubber to scrub away at the mildew or mold growth. Be sure to get into all the cracks and crevices where mold and mildew love to hide!
6. Flush the toilet to check if the hair-like growth is gone completely.
7. Repeat this process as needed until the mold and mildew are gone for good!

Using White Vinegar is an Excellent DIY Way

Vinegar is a mild acid that breaks down organic material like hair.

The acid in vinegar dissolves mineral deposits and kills organic matter, making it easy to wipe away the grime, mold, mildew, and hair-like growth in a toilet bowl.

What You’ll Need:

• A clean, empty spray bottle.
• White vinegar.
• Gloves.
• Nose mask.

Instructions:

1. Put on the nose mask and gloves before doing anything.
2. Pour the vinegar into the spray bottle.
3. Aim the nozzle of the spray bottle at the toilet bowl, and mist the vinegar onto all of the surfaces that have hair-like growth.
4. Let the vinegar sit for a few minutes so that it can break down the grime and deposits.
5. Scrub the toilet bowl with a toilet brush to remove everything that’s been loosened by the vinegar.
6. Flush the toilet to rinse away any remaining residue.

Using Hydrogen Peroxide: 

To get rid of hair-like growth in a toilet bowl, you can use hydrogen peroxide. It is a great disinfectant and will help to clean the area quickly. Plus, it is easy to find and inexpensive to purchase. 

What You’ll Need:

• Gloves.
• Nose mask.
• 1 cup of hydrogen peroxide.
• A brush/Scrubber.

Instructions:

1. Always wear a mask and gloves before dealing with hydrogen peroxide.
2. Add 1 cup of hydrogen peroxide to the toilet bowl.
3. Swish it around, making sure to get the entire bowl covered.
4. Let it sit for 30 minutes before scrubbing with a clean cloth. 
5. Flush the toilet to rinse away any residue. The hair-like growth should be gone, and your toilet will be sparkly clean.

Using Lemon Juice:

Lemon juice is an effective and natural way to remove hair-like growth from your toilet bowl. In addition to being safe and inexpensive, it also leaves your toilet smelling fresh and clean.

What you’ll need:

• 1/2 cup lemon juice.
• Toilet brush/Scrubber.

Instructions:

1. Pour the lemon juice into the toilet bowl and leave for about 10 minutes.
2. Then, use the toilet brush to scrub the entire bowl surface, including the sides and underside of the rim. Be sure to pay special attention to areas where the hair-like growth is visible. 
3. Finally, flush the toilet to rinse away the lemon juice and mold. You may need to repeat this process a few times to get excellent results.

Using Alcohol Can Suffice as Well

Though it may seem like an unlikely solution, alcohol can be quite effective in getting rid of hair-like growth in toilet bowls.

The high alcohol content of products like vodka or rubbing alcohol helps to break down the growths, making it much easier to scrub away.

What you’ll need: 

• Vodka or rubbing alcohol.
• A toilet brush/Scrubber.

Instructions:

1. Pour a generous amount of vodka or rubbing alcohol into the toilet bowl. Make sure to coat the affected areas well.
2. Let the solution sit for 1 minute to give it time to work.
3. Then, use the toilet brush/scrubber to scrub away at the growths, using a circular motion. As you’re scrubbing, you can be pouring more alcohol to help loosen the growth.
4. Finish up by scrubbing with a toilet brush to remove any remaining residue.

This method is most effective when used on small patches of hair-like growth. You should also be aware that alcohol can damage some surfaces. So, ensure you test it on an inconspicuous area

first.

Why does Mold grow in Toilet Bowl?

Mold growth in toilet bowls is a common problem in many households. The warm, humid environment inside the bowl creates an ideal condition for mold to thrive. If you notice black or greenish spots on the surface of your toilet bowl, it is likely that mold is present.

The hair-like growth is also caused by mold. The spores of mold can attach to human hair and other materials that are introduced into the bowl. Once the spores attach themselves, they begin to grow and multiply.

So how do you remove mold from your toilet bowl? Well, you know that already. The ideas above are all effective against mold. Use the one that feels suitable to you.

How to Prevent Mold Growth?

The best way to prevent mold growth in your toilet bowl is to keep the bowl clean and dry. After each use, give it a good flush so that dirt can’t accumulate. Once a week, scrub the bowl with a toilet brush and cleaner. Be sure to reach all the spots where mold might grow.

In addition, keep your bathroom well-ventilated. Open a window or turn on the exhaust fan during and after showers. This will help remove moisture from the air and prevent mold growth.

And when leaving the house empty for a long vacation, use appropriate measures to avoid this kind of issue when you come back.

To Conclude

Mold growth in toilet bowls is a common problem but it can be prevented with proper hygiene and cleaning. If you notice mold, use the tips above to get rid of it.

And most importantly, don’t forget to keep your bathroom well-ventilated so that mold doesn’t grow in the first place.